6 Mesh Welded Stainless T304 Wire

6" Mesh Welded Stainless T304 .105" Wire Dia.

Mesh Per Inch: 6
Wire Diameter: 0.1050

Welded Stainless Wire Mesh - Choosing
How do I choose a mesh size?

In general, our website gives detailed descriptions and pictures of many welded stainless steel meshes.

For someone unfamiliar with wire mesh size terminology:

4 mesh has four wires in each direction in a square inch
2 mesh has two wires in each direction in a square inch. You could easily pass a pencil through the openings
1 inch x 1/2 inch mesh has wires that are form a 1 inch x 1/2 inch rectangles
1 inch x 1.5 inch mesh has wires that are form a 1 inch x 1.5 inch rectangles
2 inch x 1/2 inch mesh has wires that are form a 2 inch x 1/2 inch rectangles
1 inch mesh has wires that are one inch distant from each other in both directions. They form a pattern of one inch squares.
2 inch mesh has wires that are two inches distant from each other in both directions. They form a pattern of two inch squares
An idea of how thick the wire is, can be estimated using the fact that a piece of paper is about three thousandths (.003) of an inch thick. So, a wire .022 inches thick is equal to about 7 sheets of paper. (.022 divided by .003 equals 7).

Stainless steel wire mesh samples are available and can be ordered online.

Welded meshes are not woven, but rather the wires are joined by resistance-welding which results in strong, consistent welds which use no filler metal in the joints. It is used when a non-toxic and non-fraying material with a large openning is required. The holes range from pencil size to 2 inch squares.