11 Mesh 0.8 Wire Stainless Steel Wire Mesh

As a supplier of stainless steel wire mesh for many different industries and applications, Steellong produces a wide variety of woven wire meshes. Our production program for square mesh ranges in aperture sizes from 0.025 mm to 14 mm. And in addition to our standard program, which is always readily available from stock, we also run lots of special productions for customer-specific applications.

Requirements in the area of fine filtration are met by using micronic meshes with filter grades ranging from nom. 1 µm upwards.Also for that range of filtermedia, stock productions and customer specific productions are combined.And the plain weave and twilled dutch weaves used in this field, as well as the corresponding support meshes, are also a part of our needs-oriented warehousing program.

Depending on the application, the production width is up to 3 m. For filtration of high viscous media,steellong produces Optimized Plain Dutch Weave filtermedia with filter grades ranging from 10 µm up to 80 µm.In many cases this is supplied from rolls or strips ready for final fabrication by filter manufacturers in final production steps.

This filament-wire connection made of stainless steel offers two advantages, high porosity with absolute homogeneous pore structure and high mechanical stability. Retention rates are ranging from 3 µm up to 100 µm. High mechanical strength coupled with flexibility does allow highly efficient surface and depth filtration with a single filter media.

Steellong produces meshes in its standard program with mesh opening of 0.025 mm up to 14 mm (industrial wire mesh).Depending on the aperture, the woven wire meshes are manufactured as plain weaves (1/1) or as twilled weaves (2/2).
The standard materials used are the stainless steels AISI 316 and 316L.
Depending on the type of mesh, standard production widths range from 1.3 m to 3 m.
Customer-specific orders make up a large part of the production volume of our weaving department.

Plain Dutch Weaves are important components in the range of filter media which we supply for filtration grades of about 40 µm.The cloth is manufactured in a plain pattern (1/1) in which die intervals of the warp wires are greater than between the weft wires. The surfaces of Plain Dutch Weaves are closed and filtration takes place at the crossing point of warp and weft.
These weaves have a considerably greater mechanical stability than plain open square meshes. Our available stock of Plain Dutch Weaves, with openings ranging from nom. 40 µm up to nom. 85 µm, cover most of the needs for filter media in industrial filtration.Plain Dutch Weaves are used in drum filters, nutsch-type filters and in cartridge filters.
The materials used for these stock items are the stainless steels AISI 304 and 316.

Twilled Dutch Weaves are produced by weaving with fewer, thicker warp wires and a large number of thinner weft wires. Using the twilled weaving pattern (2/2), it is possible to create light-proof meshes. The available media range from 1µm nom. opening up to 50 micron opening. Due to the very high mesh density this weaving pattern ensures extremely robust weaves even with very small apertures, making Twilled Dutch Weaves the optimal choice for a wide variety of filtration applications and filtration equipment. These meshes are used in nutsch-type filters in the pharmaceutical and chemical industries, in various types of precoat filter systems as well as in cartridge filter systems. These stocks are produced using the standard materials AISI 304L/316L, but customer specific productions can also be supplied on request.